How to calculate the heating of floor heating?
With the arrival of winter, the issue of floor heating has become the focus of attention for many families. As a comfortable and energy-saving heating method, floor heating involves many factors in its heating calculation. This article will combine the hot topics and hot content on the Internet in the past 10 days to provide you with a detailed analysis of the calculation method of floor heating and provide structured data for reference.
1. Basic principles of floor heating
Floor heating is a heating method that evenly transfers heat to the room through pipes or electric heating films buried under the floor. The heating effect is closely related to factors such as heat source power, house insulation performance, and floor heating density.
2. Key factors affecting floor heating
| factors | Description | degree of influence |
|---|---|---|
| Heat source power | Heat output capacity of floor heating systems | high |
| House area | The size of the space that needs to be heated | high |
| Insulation performance | Thermal insulation effect of walls, doors and windows | in |
| Floor heating pipe spacing | The intensity of pipe laying | in |
| Water supply temperature | The temperature of the heating medium | high |
3. Specific calculation methods for floor heating
Floor heating calculations usually use the following formula:
Heating load = House area × Heat load per unit area × Correction coefficient
| parameters | Value range | Description |
|---|---|---|
| heat load per unit area | 80-120W/m² | Adjust according to regional climate differences |
| Correction factor | 0.8-1.2 | Consider factors such as the orientation of the house and floor height. |
4. Floor heating standards in different regions
According to the hot discussions on the entire network, the floor heating standards in various places are compiled as follows:
| area | Recommended water supply temperature | Recommended return water temperature | room temperature standard |
|---|---|---|---|
| Northeastern region | 45-55℃ | 35-45℃ | 18-22℃ |
| North China | 40-50℃ | 30-40℃ | 16-20℃ |
| East China | 35-45℃ | 25-35℃ | 16-18℃ |
| South China | 30-40℃ | 20-30℃ | 14-16℃ |
5. Calculation of floor heating costs
Floor heating operating costs are one of the issues that users are most concerned about. The following is a comparison of floor heating operating costs for different energy types:
| Energy type | Price per unit of heat | 100㎡monthly fee | Energy efficiency ratio |
|---|---|---|---|
| gas boiler | 0.3-0.5 yuan/kWh | 800-1200 yuan | 0.9-1.1 |
| Electric floor heating | 0.5-0.8 yuan/kWh | 1200-2000 yuan | 1.0 |
| air source heat pump | 0.2-0.4 yuan/kWh | 600-1000 yuan | 3.0-4.0 |
6. Suggestions for improving floor heating efficiency
1. Insulate the house well to reduce heat loss
2. Properly set the floor heating temperature, which can save 5% of energy for every 1°C decrease.
3. Clean floor heating pipes regularly to maintain good heat transfer effect
4. Adopt zoning control and provide heating on demand
5. Choose high-efficiency heat source equipment, such as air source heat pumps
7. Frequently Asked Questions about Floor Heating
Q: What is the reason why floor heating is slow to heat up?
A: It may be caused by blocked pipes, insufficient water pressure or insufficient power of the heat source.
Q: Is the cost of floor heating higher than that of radiators?
A: The initial investment is higher, but the operating costs are usually lower and the comfort is better.
Q: Does floor heating require watering out every year?
A: No, frequent water discharge will affect the stability of the system.
Through the above analysis, I believe you have a clearer understanding of floor heating calculations. Reasonable calculation and optimization of the floor heating system can not only ensure comfort but also effectively control operating costs.
check the details
check the details
en
